RO Control Panel
RO Plant Panels
The Industrial RO Controller Panel is used for operation of the RO plants. The controller has a pre-programmed RO operating logic. The control panel can take 6inputs signals, namely: Low Pressure Switch(LPS), High Pressure Switch (HPS), Raw Water Level Switch (RWL), Permeate Tank Level Switch (TWL), 2 Auxiliary Inputs(Used for interlocking with the automatic pretreatment Multi Port Valves). The controller also provides for a Conductivity input. Flow sensing is optional. The Control panel gives 4control outputs, namely: Raw water Pump(RWP) on/off, High Pressure Pump (HPP)on/off, Flushing Valve Solenoid open/close(230VAC), Dosing Pump on/off (230VAC).Auto MPV power connection is available for Auto mode. Pump Time / Alarm selectable potential free contact is available. Manual Backwash Alert Indication (selectable for Manual Pretreatment) as an alert message is given. The advanced electronics also takes care of the required motor protection such as Over Voltage , Under Voltage, Over Load,Dry Running and Single Phasing / Phase Reversal with settable parameters